Applicable industries

It could be widely used in chemical industry, spray, water treatment industry and so on. The diaphragm, valve ball, valve seat and other materials can be customized.
By choosing the right diaphragm material and some other parts, it can convey acid, alkali, strong organic solvents and high viscous liquid.
Please make sure the diaphragm material in this link meets your liquid requirements before placing order .

The PP pump series has the feature as follow:

It could not only pump the flowing liquid, but also convey some medium which is not easy to flow. It could convey high viscous liquid. (viscosity below 10, 000 centipoise). It has advantages of the other pump, such as self-priming pump, submersible pump, shielding pump, mud pump and impurity pump and so on. The pump has no rotating parts, will not cause environmental pollution and endanger personal safety.
Good stability, corrosion resistance, acid and alkali resistance, wear resistance, high temperature resistance,
The inlet and outlet installation position can be adjusted according to needs, easy to install, easy to maintain.
Without electricity, explosion-proof, can convey flammable fluid.
No dynamic seals, and does not need oil lubrication, even dry running without damage to the pump.
Lift(head) and flow can be adjusted stepless through adjusting valve opening. (air pressure between 2-8kg/cm2) . It allowed to pass through the maximum particle diameter up to 10mm pumping slurry, impurity, and with minimal wear.

Working nosie: 50dB

PVDF bodyTeflon

Parameters

Max.flow: 18.9L/min (5GPM)

Max lift：70 meter

Max suction：3 meter

Outlet pressure: 7 Mpa (70bar)

Pump body: PP

Diagram:Buna-N diaphragm/Santoprene diaphragm/F46 diaphragm optional

Valve ball: PVC,(Santoprene,F46 optional )

Valve seat:PP

Center block：Aluminum

Suction and discharge size: 15mm (1/2" )

Air inlet size: 12mm (1/4")

Maximum particle diameter: 1.5mm

Product size: 21*15*26cm (L*W*H)

Package weight:3.7Kg

Package size:30*20*30cm